E PASS Intelligent System
選單
Absolute Positioning System (APS)
![絕對定位系統(APS) 絕對定位系統(APS)](https://en.hitachi-yungtay.com.tw/wp-content/uploads/elementor/thumbs/絕對定位系統APS-pbw2hqk0diikduel71pk7nlh7ch9st9ohyiqwrtr68.png)
The sensor, installed on the elevator car, reads the magnetic tape installed in the shaft in a contactless manner and detects the current absolute position of the elevator car. This positioning system avoids measurement errors or inaccuracies caused by rope slippage or dynamic rope effect. Even under unfavorable environmental conditions (e.g., thick black smoke), the measurement results are not affected. In addition, safety is significantly improved by enhanced ascending and descending Overspeed protection and end-stage rational deceleration checks.
Event of Power Failure
![](https://en.hitachi-yungtay.com.tw/wp-content/uploads/2021/08/APS停電-862x1024.png)
Elevator Stops Immediately
If the elevator does not install the "Absolute Positioning System (APS)," the elevator will be stopped in place by the brake of the engine motor when a power outage occurs due to an earthquake or other unknown reasons.
Traditional Elevator
The elevator can prevent passengers from being trapped due to a sudden power failure and automatically run to the nearest floor to allow passengers to leave the car safely. After the power restore, the elevator will automatically resume regular operation.
YUNGTAY Elevator
Elevators equipped with an "Absolute Positioning System (APS)" do not need to perform traditional elevators' complicated and time-consuming positioning correction operation. Instead, when the power supply returns, the control system can automatically detect the current absolute position of the elevator car. As a result, the elevator can quickly return to regular operation.
E PASS Intelligent System
智能E PASS
E PASS Intelligent System
選單
AbsolutePositioning System (APS)
![](https://en.hitachi-yungtay.com.tw/wp-content/uploads/2021/08/絕對定位系統APS.png)
The sensor, installed on the elevator car, reads the magnetic tape installed in the shaft in a contactless manner and detects the current absolute position of the elevator car. This positioning system avoids measurement errors or inaccuracies caused by rope slippage or dynamic rope effect. Even under unfavorable environmental conditions (e.g., thick black smoke), the measurement results are not affected. In addition, safety is significantly improved by enhanced ascending and descending Overspeed protection and end-stage rational deceleration checks.
Event of Power Failure
![](https://en.hitachi-yungtay.com.tw/wp-content/uploads/2021/08/APS停電-862x1024.png)