E PASS Intelligent System
YUNGTAY Elevator Central Monitoring
(YECM)
This system transmits the elevator operation signal from the elevator control panel to the floor monitoring computer through digital communication. With the display fully in Chinese, the single-host monitor shows the elevator operation status of the whole floor and the status controlled by the computer keyboard in the visual field of monitoring personnel. Thus, the building manager can monitor the elevator operation status, set the operation mode, give control commands, and carry out statistical analysis of elevator operation, preset scheduling, and elevator fault records.
Multiple Functions
Response to Abnormal State
When the elevator has abnormal operating conditions, the system will instantly show up the building Site plan and the corresponding layout of the elevator on the screen. And prompt the abnormal data of the elevator and sound an alarm to remind the building securities personnel to deal with the relative abnormal of the elevator.
Remote Operation
YECM system can remotely monitor and control the operation status of the elevator, remotely control the elevator to the target floor, set the non-stop floor, manually enter the fire control and turn into the out-of-service mode.
Synchronous Monitoring
When the building characteristic is a large shopping mall or a condominium, the security room can display the YECM system in the central monitor. Furthermore, the disaster prevention center or partition guard room can set multiple additional LCD screens to simultaneously watch the YECM information screen of the central monitoring center (only monitor but not control ).
Operating State Recording
The YECM system provides real-time data records and returns of relevant elevator operating information, such as the position of the elevator car, the running direction, the expected stopping floor, the rate of loading, and the abnormal status of the elevator. And carry out statistical analysis of traffic and people flow in the YECM system.
E PASS Intelligent System
YUNGTAY Elevator Central Monitoring System (YECM)
This system transmits the elevator operation signal from the elevator control panel to the floor monitoring computer through digital communication. With the display fully in Chinese, the single-host monitor shows the elevator operation status of the whole floor and the status controlled by the computer keyboard in the visual field of monitoring personnel. Thus, the building manager can monitor the elevator operation status, set the operation mode, give control commands, and carry out statistical analysis of elevator operation, preset scheduling, and elevator fault records.
Multiple Functions